Products

Balance Weights

Balance Weights

These balance weights are laser cut from 0.015" (0.4mm) black polystyrene sheet. We have now started to add these to some of our conversion packs, if we have a set suitable.

Conversion Packs

Conversion Packs

Standard conversion packs

These packs contain everything necessary to convert proprietary models to 'OO' Fine scale, E.M. and 18.83, unless otherwise stated. Depending on design of the model, some packs have completely assembled or partially assembled wheel sets.

Double drive conversion packs

These are conversion packs for those who wish to have two powered bogies in the model. These are available only as complete sets, not individual axles or bogies. These packs contain everything necessary to convert proprietary models to 'OO' Fine scale, E.M. and 18.83, unless otherwise stated. Depending on design of the model, some packs have completely assembled or partially assembled wheel sets.

Cosmetic Chassis Side Frames

Cosmetic Chassis Side Frames

These cosmetic chassis side frames are laser cut from 0.020" (0.5mm) black polystyrene sheet and have been designed and developed by Philip Hall for use when converting a ready to run 'OO' gauge chassis to either EM or 18.83, to give the appearance of the chassis being correct to width for the new wider gauge.

Economy Conversion Packs

Economy Conversion Packs

Economy conversion pack

The modeller will have to assemble wheels to axles, make their own arrangements to earth the required wheels to the axles and make arrangements for any other electrical pick-up required, fit the original drive gear to the axle where necessary and make any modifications to get the wheels to clear any obstructions.

Double drive conversion pack

These are conversion packs for those who wish to have two powered bogies in the locomotive. These are available only as complete sets, not individual axles or bogies.These conversion packs contain only the basic components to convert proprietary locos. (i.e. Axles, Wheels and Wheels where the gear is moulded to the back of the wheel.

The modeller will have to assemble wheels to axles, make their own arrangements to earth the required wheels to the axles and make arrangements for any other electrical pick-up required, fit the original drive gear to the axle where necessary and make any modifications to get the wheels to clear any obstructions.

Special Order Items

Special Order Items

Here you will find products that are available by special order only. All of these products will require a special order code, this code will then need to be entered before the item can be put into your basket. To get your special order code you will first need to contact us.

 

Current Special Order Items:

• Axle Bearing (GS20132-CP)
• Hornby 0-4-0 'Sentinel'

Hornby 0-4-0 'Sentinel'.

I have had a couple of enquiries about a third batch of this conversion. I will put a third batch into production if there is enough interest in one. I will need at least 20 conversions of each gauge, therefore, if you would like a conversion for the Hornby 'Sentinel' email your interest and it will be added to the list below.

Current Interest:
EM: 13
18.83: 11

Updated: 07/10/2017

Please note that this is NOT the outside crank version